The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm.When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host will dial 6 preset telephone/mobile phone numbers automatically. In addition, users can dial the host and set in arm/disarm mode by any phone. The specific functions are as follows:
1. WAVECOM GSM module
2. 8 wireless zones (1 wireless SOS zone, 1 wireless fire alarm zone, and the other 6 wireless zones can be defined by user), 1 external power failure alarm zone.
3. Can set 6 mobile phone/telephone numbers for auto-dialing alarm.
4. The host automatically stores system status, while its power is off.
5. Can monitor the alarm site and report the alarm zones.
6. Remote arm/disarm
7. You can increase/decrease detectors.
8. Can program the alarm host by wireless keyboard or phone.
9. With voice reminder while alarm host is working.
10. With standby rechargeable battery and support dialogue.
11. Wireless signal transmission, easy installation, and can not afraid of cutting line.
12. Connected with the alarm center through GSM network
Specification of alarm host
a) GSM network frequency: 850/1900MHZ or 900/1800MHZ
b) External power failure alarm
Start-time: less than 1s
c) Alarm response time
Less than 10s (GSM in normality)
d) Power requirements: AC110~ 220V 50Hz ~ 60Hz
Standby battery: DC8.4V
Standby battery working hours: more than 10 hours
e) Working conditions
Operating temperature: －20 to 60℃
Humidity: 20% to 95%
tri-w dot shinepal dot com
Click to enlarge image
Model Number
Related Keywords:
Bookmark / Share this page